3D Printer Accessories

Bambu Lab - Hotend with Harden Steel Nozzle

For X1 and P1 Series PrintersHighlights of Various Nozzle Diameters0.2mm NozzleOptimal Print Finenes..

$22.99

Bambu Lab - Activated Carbon Filter

OverviewMelt extrusion printers will generate VOCs while printing because the heating temperature of..

$8.99

Bambu Lab - Filament Replacement Cutter (3 PCS)

OverviewThe filament can be cut to prevent the supplies from clogging when using the Bambu X1 s..

$6.99

Bambu Lab - Nozzle Wiper

OverviewThe Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. I..

$6.99

Bambu Lab Hardended Steel Extruder Gear Assembly

OverviewThe hardened steel extruder gear assembly is an internal component of the hardened..

$25.99

Bambu Lab - AMS Lite Filament Hub

OverviewThe AMS lite Filament Hub is a key part of reliable filament switching during mult..

$7.99

Bambu Lab - Dual-Sided Smooth PEI Plate

High Z-axis precision printingThe use of a Smooth PEI Plate contributes to improved Z-axis pre..

$49.99

Bambu Lab - Silicone Sock for Hotend

OverviewThe Silicone Sock for Hotend is made from high-quality silicone for higher temperature resis..

$9.99

Bambu Lab - Textured PEI Plate

Recommended SettingsPlease note that other slicer settings might need to be adjusted based on t..

$49.99

Bambu Lab 4-in-1 PTFE Adapter

OverviewThe Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the o..

$7.99

Bambu Lab P1 Ceramic Heater & Thermistor

OverviewThe ceramic heater and thermistor for Bambu Lab P1P 3D printer are combi..

$31.99

Bambu Lab Thermistor - X1 Series

OverviewThe thermistor has highly accurate temperature measurement and reliable structural design.&n..

$17.99

Bambu Lab Wireless Charger Kit

OverviewPlease note that the hardware kit does not include the 3D printed parts as shown in the main..

$43.50

Bambu Lab X1 Series Ceramic Heater

OverviewThe ceramic heater can heat the nozzle up to 300℃, which is for use with Bambu Lab comp..

$17.99

Brass M6 Nozzle 1.75mm -0.4MM (2 PACK )

This 0.4mm diameter nozzle is compatible with the standard E3D V6 hotend and can be used ..

$8.00

Brass MK8 Nozzle 1.75mm (2PK)

Two Pack of Brass MK8 1.75MM Nozzles compatible with MK8 hot ends.Ranging in sizes from 0.1mm ..